Written by
Nora Halvorsen Appliance Care EditorPublished October 26, 2026
VERIFIED
Error code39
ApplianceCooktop
Why 39 appears
The control and the housing no longer agree on configuration. According to the manual, the cause is that one of the 2 housings was replaced. The entry is for the ESEC-UIB cooktop in the 30-inch ceramic glass induction form.
Manual steps in order
Remove power, wait 30 seconds, then put power back.
Should 39 return, make sure the good ESEC-UIB is the one fitted in the cooktop.
To clear the error: press and hold WARM, then press ON for the right front zone until it beeps. With WARM still held, release the right front ON key and press ON for the left front zone until it beeps, at which point the configuration starts.
If the code returns once more, the Filter Circuit Board gets replaced, and a technician does that.
Electrolux cooktop repair, San Francisco and the Bay Area
Questions about code 39 on a cooktop in the Bay Area go to (415) 449-0036. Mention the model number, which induction housing was replaced and what you tried. See Electrolux cooktop repair for background.
Model compatibility: Electrolux reuses codes across series and model years, so 39 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Configuration mismatch between the ESEC-UIB and the induction housing after one housing was replaced.
Important safety warning. Do not attempt repairs involving electrical components, gas, water lines, refrigerant or sealed systems. Unplug the appliance if it is safe to reach the outlet, and leave internal diagnostics to a qualified technician.
Seeing this code on your Electrolux appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Electrolux ECCI3068AS 30-inch induction cooktop repair for San Francisco and Bay Area homes: dead zones, pan detection and control errors tested before…
You submit a request with your appliance model and symptom, we confirm an appointment window, and a technician performs an on-site diagnosis. You then receive a clear estimate and decide whether to proceed before any repair begins.
Yes. We provide an upfront estimate after diagnosis. No parts are ordered or installed until you approve the work, so there are no surprise charges.
Replacement parts are selected for the exact model and confirmed with you before ordering or installation.
Service areas are listed on the Locations page. Contact us with your ZIP code to confirm current coverage for your address.
Ready to get your Electrolux appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
