Electrolux E23BC79SPS Repair in San Francisco

The E23BC79SPS is an Electrolux French-door refrigerator from the ICON Designer series. It is no longer sold new, so most units we see are well settled into their kitchens, often behind custom panels or trim in San Francisco flats and Bay Area townhouses.

What this model is

The E23BC79SPS is a French-door refrigerator in the ICON Designer series and is discontinued. The model number alone does not say more than that. Size, finish and feature details are confirmed on the unit during the visit, not assumed from the name. If you are unsure you have this exact model, read the label before you book. It is usually on an inside wall of the fresh-food compartment or along the door frame.

Complaints we hear on French-door refrigerators

A French-door layout puts the fresh-food section on top and the freezer in a lower drawer, so complaints tend to split by location. In the upper section it is usually warm shelves, water pooling at the bottom, or a door that swings back open. In the freezer it is frost on the back wall, ice that clumps, or a drawer that no longer glides. Noise is the other common call: a steady hum is normal, a rattle or repeated clicking is worth a visit. Our Electrolux refrigerator clicking and buzzing sounds article walks through which sounds point where.

On an older unit like this one, a technician also looks at door gaskets, the defrost system and the fans that move cold air between sections, because wear in these areas produces symptoms that look alike from the outside.

Kitchen and installation notes

ICON Designer units are often fitted tight between cabinets. Before a visit, make sure the doors can swing fully open and the path to the kitchen is clear. If the refrigerator sits on a water line for the ice maker or dispenser, mention it when you book, and note whether the shutoff valve is reachable. Pulling the unit forward should be left to us, since a stiff water line or a cord can be damaged by moving it blindly.

Checks you can do from the outside

Confirm the refrigerator has power at the outlet and that the breaker has not tripped. Look at the door gaskets for folds or debris, and close each door gently to see whether it seals. Make sure vents inside are not blocked by groceries. If a code appears on the display, write it down exactly. Codes we document for this family include Electrolux refrigerator PF code for power failure and Electrolux refrigerator H code for a high temperature alarm. Please do not open back panels or touch the sealed cooling system.

Booking a visit

Start with our Electrolux refrigerator repair page, or browse the Electrolux refrigerators guide for the wider lineup. We diagnose first, give you a written estimate, and repair nothing until you approve it.

Frequently asked questions