Skip to content
Model Reference

Electrolux ELTG7300AW Repair in San Francisco

A gas tower adds one more thing to check than its electric cousin, and one rule that overrides every other tip.

Model number ELTG7300AW
About this model

Model overview

The ELTG7300AW is a current 300 Series gas laundry tower. The G in the prefix marks gas, so the dryer half burns gas for heat while the washer below runs on electricity and water. It suits homes with a gas stub in the laundry closet, common in older San Francisco buildings.

Gas safety comes first

If you smell gas, leave the home straight away without touching switches, and call the gas utility or 911 from outside. Do not try to find the leak. Do not return until you are told it is safe. A burning smell or sparks is different: switch the tower off at the breaker and leave it off.

Dryer tumbles but clothes stay cool

On a gas dryer this usually leads to the ignition path. A technician checks whether the igniter glows, whether the gas valve coils open, whether a flame sensor or safety switch interrupts the burn, and whether poor exhaust is tripping the high-limit protection. We do not touch gas fittings casually; those checks happen with proper tools and, where needed, a shutoff.

What you can safely check

  • Confirm the gas shutoff handle behind the tower is parallel to the pipe if it is reachable without moving the unit. Do not turn it with force.
  • Check the breaker, because the gas dryer still needs electric power for controls.
  • Clean the lint filter and inspect the outdoor vent flap.
  • Write down any code.

Installation details that matter

The gas line, the flexible connector and the vent all run behind a closed cabinet. Landlords should keep a record of who last moved the stack. A moved tower with a kinked connector is a risk we address before anything else.

Ventilation and the closet

A gas dryer draws combustion air from the room, so a tightly shut closet door with no gap can starve it. If your tower lives behind a solid door, leave it open during a cycle and tell us how it is enclosed. That detail changes where we start looking.

Label and related pages

The model plate is usually in the washer door frame or inside the dryer opening. Compare with the electric twin ELTE7300AW and the sibling ELTG7600AW. For a general overview see Electrolux laundry tower repair or Electrolux laundry towers. We diagnose first, give a written estimate and ask your approval.

Frequently asked questions

Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.

Fix it right

Repair service

Models

Other models

Ready to get your Electrolux appliance working again?

Book a repair online or call us — clear estimates and approval before any repair work begins.

Book a repair

Tell us what’s wrong — we’ll take it from there

Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.

Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area San Francisco Bay Area, California

Request your repair

(415) 449-0036 Book a Repair